Y6 rock drill
Weight:6kg
Length: 426mm
Working pressure 0.4-0.63 Mpa
Air hose dia. Φ13 mm Air consumption ≤9.5 * l/s
Impact rate ≥51 * Hz
Shank:15*88mm
Bit size: Φ20 mm
Mots clés:
Perceuse de roche
Détails du produit
Desciption
Model Y6 Hand-held Rock Drill is a light-duty tool designed for quarrying and drilling operations. You may expect satisfactory results with the adoption of this drill either in making 20mm holes in rock and buildings or in the secondary blasting of rock, it is most suitable for drilling in marble and granite. Y6 use small taper drill rod with taper chisel bit, diameter 17-22 mm, and use plug hole integral steel also as for stone working, stone trimming, and 2nd splitting blocks.
Model Y6 Hand-held Rock Drill is a light-duty tool designed for quarrying and drilling operations. You may expect satisfactory results with the adoption of this drill either in making 20mm holes in rock and buildings or in the secondary blasting of rock. It is most suitable for drilling in marble and granite.
Performance
Light weight;convenient operation; high efficiency;fast drilling velocity; low consumption; long life parts etc.
Applications
Model Y6 Hand-held Rock Drill is a light-duty tool designed for quarrying and drilling operations. You may expect satisfactory results with the adoption of this drill either in making 20mm holes in rock and buildings or in the secondary blasting of rock, it is most suitable for drilling in marble and granite.
Specification
Model | Y6 | Y8 | Y10 | Y19A | Y20 | Y24 | Y26 | Y28 |
Weight(kg) | 6 | 8 | 10 | 19 | 20 | 24 | 26 | 26 |
Air consumption(L/s) | ≤9.5 | <9.0 | ≤9 | 43 | 25 | ≤50 | ≤47 | |
length (mm) | 426 | 428 | 458 | 600 | 605 | 604 | 650 | 661 |
shank (mm) | 15*88 | 15*88 | 15*88 | 22*108 | 22*108 | 22*108 | 22(25)*108 | 22*108 |
Bore Dia (mm) | 20 | 20-30 | 20-30 | 30-42 | 30-42 | 30-42 | 30-42 | 34-42 |
Drill depth (m) | 0.5 | 0.5 | 0.5 | 5 | 3 | 5 | 5 | 5 |
Impact rate (Hz) | 51 | 51 | ≥51 | 35 | 34 | 30 | 27 | ≥28 |
Hose connection(mm) | 13 |
| 19 | 16 or19 | 19 | 19 | ||
Air pressure(Mpa) | 0.4-0.63 | 0.2-0.3 | 0.4 | 0.4 | 0.4 |
Operation and Maintenance
Take care of proper lubrication (recommended lube oil N46 and N22, Chinese National Standard GB443-84). The drill should not be run without proper lubrication.
Check if the air connector (27) is tightened to prevent it from falling out or shooting out and causing serious injury.
Maintain and repair the drill periodically. If the drill is to be stored for a long time, disassemble and coat it with grease and keep it in a dry place. \
Parts List for Model Y6 Rock Drill:
NO. |
Part No. |
Description |
Qty. |
1 | Y6- 1.01 | Cylinder | 1 |
2 | Y6- 1.02 | Piston | 1 |
3 | JB/ZQ3777-86-55-70 | Hose clamp | 1 |
4 | Y6- 1.07 | Outside sleeve | 1 |
5 | Y6- 1.05 | Valve cover | 1 |
6 | GB879 4*24 | Elastic pin | 2 |
7 | Y6- 1.06 | Pin | 1 |
8 | Y6- 1.04 | Valve | 1 |
9 | GB879 5*12 | Elastic pin | 1 |
10 | Y6- 1.03 | Valve chest | 1 |
11 | Y6-2.04 | Ratchet ring | 1 |
12 | Y6-2.03 | Spline driver | 1 |
13 | Y6-2.02 | Rotary sleeve | 1 |
14 | Y6-2.05 | Ratchet pawl | 2 |
15 | Y6-2.01 | Front head | 1 |
16 | Y6-2.06 | Ratchet spring | 2 |
17 | Y6-2.07 | Steel puller | 1 |
18 | Y6-3.03 | Throttle valve | 1 |
19 | 12.5*1.8GB3452. 1-82 | O-ring | 1 |
20 | Y6-3.08 (Z) | Backhead assembly | 1 |
21 | Y6-3.01 | Elastic sleeve | 2 |
22 | Y20-3. 19 | Control lever | 1 |
23 | Y6-3.05 | Handle | 1 |
24 | GB879 4*12 | Elastic pin | 2 |
25 | 16*1.8 GB3452. 1-82 | O-ring | 1 |
26 | Y6-3.02 | Through bolt | 2 |
27 | Y6-3.06 | Connector | 1 |
28 | Y6-3.07 | Spring | 2 |
29 | GB923 M10 | Acorn nut | 2 |
Atelier de HENGLONG et processus de fabrication
Emballage et expédition
Usine
Customer visit
Production
PROCESSUS D'INSPECTION DE LA QUALITÉ
La qualité des produits est l'un des maillons essentiels du développement et de la croissance de Yanggu Henglong Engineering Co., Ltd. Notre société dispose de processus d'inspection internes et externes stricts pour garantir la qualité de nos produits. Notre processus d'inspection de nos produits est le suivant.
Produits connexes
MESSAGE
Contact
Bureau de la Chine:
WhatsApp: +8613863587857
Tél: +86-635-8278268
Télécopieur: +86-635-6858268
Courriel: info@hlrocktools.com
Ajouter: rue Sipeng, ville de Shouzhang, comté
de ymangu, province du Shandong, Chine
www.hlrocktools.com
Bureau du Pakistan:
CONTACT:Muhammad Haider
WhatsApp: +923246464600
Courriel: info@hlrocktools.com
Ajouter: PopCorn Studio Gulberg,Block K Gulberg 2,
Lahore,Pakistan
www.hlrocktools.com
©2023 Yandar Henglong Construction Machinery Co., Ltd.SEO
